Body Jewelry Materials – Hardwoods

This article is from the Piercing FAQ, by Anne Greenblatt with numerous contributions by others.

2A.3a Hardwoods

Hardwoods are most often used to make plugs for enlarged piercings,
such as ear lobe, labret, and septum piercings. Hardwoods are natural
materials that work in harmony with the body. They can “breathe” with
a piercing and allows an interchange of oils. Wood stays warmer than
metals. Wood does not develop the bad odor plastics can develop.

Hardwoods are broad-leafed, deciduous trees (angiospermous). The term “hardwood” does not actually refer to hardness: for example, balsa is a hardwood. The part of the tree normally used is the center
heartwood, normally darker and denser than the surrounding sapwood.

A few species of wood commonly used for jewelry, furniture and inlays
are endangered or threatened. These species are regulated by CITES,
the Center for International Trade of Endangered Species. Endangered
species include Brazilian rosewood (Dalbergia nigra). Threatened
species include Mexican mahogany (Swietenia humilis) and Carribean
mahogany (Swietenia mahagoni), Commoner (Guaiacum officinale), and
Holywood lignum vitae aka “Tree of Life” (Guaiacum sanctum), Bigleaf
mahogany (Swietenia macrophylla), and American mahogany (Swietenia
meliaceae). In some cases, wood from threatened species is acquired by salvage or through sustainable harvesting.

Grain (fibers within the wood) is considered either open or closed.
Open-grained woods may collect bacteria, shed skin tissue, and dirt
and hence generally should not be used for jewelry.

The overall shape and dimensions of the piece should be consistent and
appropriate for the particular piercing with room to allow for
possible swelling. The finish should be free from scratches, pits or
tool marks. The piece should be free of raised grain (wood fibers),
even when wet. Luster varies from species to species and the wood may or may not shine. An oiled plug will appear dull.

Because hardwoods are porous and readily absorb and release moisture,
oil, and bacteria, hardwood plugs are best worn in healed piercings
and dry areas of the body. Because hardwood jewelry cannot be
sterilized it should always be handled by clean hands and only worn by
one person. Autoclaving hardwood jewelry may cause it to crack, split,
and warp. Hardwood jewelry should be cleaned regularly with a
non-chemical soap that is safe for the body. Tea Tree oil can also be
used; prior to use a patch test is recommended to test for
allergy. Hardwood jewelry should be oiled after cleaning to benefit
the skin and aid insertion.

The type of finish applied is usually an oil and sometimes a sealant.
Many finishing oils and sealing products contain chemicals, toxins,
solvents, petroleum or animal products, or pigments. Using a finish
that entirely seals a hardwood plug eliminates the purpose of wearing
wood. I usually recommend a non-toxic oil or wax. Food grade oils such
as olive and peanut are generally safe but may break down (turn
rancid) with heat and time; pieces finished using food grade oils
should be washed and re-oiled periodically to avoid turning
rancid. Waxes can be animal or vegetable based; waxes may come off
with heat or be rubbed off while cleaning. I do not recommend using
pigment as most are chemical or solvent based and can fade or enter
the bloodstream.

Some people are allergic to certain hardwoods. A sensitivity to
hardwoods can also be acquired with exposure. The risk of developing a
sensitivity to certain hardwoods is increased for those who work with
the woods by way of the dust which is produced in the production
process. The hardwoods likely to cause allergic reactions include all
woods within the Dalbergia genera, or the rosewoods: African blackwood
(Dalbergia melanoxylon), Brazilian rosewood (Dalbergia nigra),
Cocobolo (Dalbergia retusa), Indian rosewood, aka Bombay blackwood
(Dalbergia latifolia), Kingwood aka Violetwood (Dalbergia cearensis),
Tulipwood (Dalbergia frutescus), Teak (Tectona grandis), Purpleheart
aka Amaranth (Peltogyne spp.); and possibly Greenheart and Satinwood
(Chloroxylon swietenia). Some woods may be very hard to identify; for
example, African blackwood can masquerade as ebony.

One thought on “Body Jewelry Materials – Hardwoods

  1. Luke

    Oh my goodness! an amazing article dude. Thank you However I am experiencing difficulty with ur rss . Don’t know why Unable to subscribe to it. Is there anyone getting similar rss drawback? Anyone who is aware of kindly respond. Thnkx


Leave a Reply

Your email address will not be published. Required fields are marked *